Some photos of completed projects

Gallery, Projects and General > Gallery

<< < (2/3) > >>

sbwhart:
Nice tools Fred :wave: .

I've got to ask what a KMG ???? :scratch:

Cheers
:wave:
Stew

crankshafter:

--- Quote from: sbwhart on February 10, 2009, 12:30:52 PM ---Nice tools Fred :wave: .

I've got to ask what a KMG ???? :scratch:

Cheers
:wave:
Stew

--- End quote ---
Hey Stew.
KMG= Knife Maker Grinder :bugeye: :jaw:
Regards CS

Pelallito:
Stew,
Here is the website for the real KMG- http://www.beaumontmetalworks.com/index.html
CS,
I never knew that the initials stood for that. :bang: Thanks for enlightening me.

Eric and Ralph,
it is a nice little press. The only parts I did not make, were the 4 allen screws holding the cover.

Bernd,
Unfortunately, I only have his first two books. I need to get the rest.

Spin,
I started on a G. Thomas 4" manual rotary table and got side tracked. I made the top, and got mad at myself and put it aside for a while. I took a small cut with my milling adapter in the lathe and it shifted. I truly dislike that thing! :hammer: I took a little too much material because of that. I will weld it up and clean it up. That blasted thing turned a brand new dovetail cutter into junk in the blink of my eye when I tried to cut the dovetail for the travelling steady. :bugeye: I ended up taking it to work and made it on our vertical mill.

Thanks for the kind words.
Regards,
Fred

PS Ralph, I had another small video that I took at the same time. I deleted it because I did not know I was filming at the time. I could see a great view of my shop safety sandals and calves along with the floor and walls. :D :)

sbwhart:
Hi Fred

Thanks for the info on the KMG, very interesting video it certainly a very versitile piece of kit. :borg:

Cheers
:wave:
Stew

Darren:
Very nice workmanship there, that press looks like a lot of work and the belt sander looks really useful.

Nice..... :thumbup:

Navigation

 Message Index

Go to full version