| The Shop > Electronics & IC Programing |
| Slicer software |
| (1/2) > >> |
| John Stevenson:
So as not to hi-jack the reprap thread i have started a new one. First of all read this post. http://www.homemodelenginemachinist.com/index.php?topic=18727.0 Forget all the naysayers what I'm interested in is doing the same but in say 3mm slices and getting a DXF of each slice. Tried to contact Matt but no reply. Also had a look at slic8r program but can't see how to get a DXF as opposed to a reprap G -Code. Any clues guys ? John S. |
| Rob.Wilson:
--- Quote from: John Stevenson on July 11, 2012, 01:09:39 PM ---Any clues guys ? John S. --- End quote --- NOPE :) Interesting thread John , i can see the potential . Rob |
| Country Bubba:
John, As a thought to your query, there is a guy on cnczone that has a program gcode2dxf (or something like that) that will take a gcode and produce a dxf file from it. Ah, here is his site: http://codemangler.com/?page_id=7 Just a thought |
| Rob.Wilson:
I think JS is after a program that takes a 3D solid file and slices it and is able to save the slices as a DXF file so he can use the DXF file in what ever CAM program to create a G code file is a close :palm: Rob |
| Chazz:
Check out "Autodesk 123D Make" might be along the lines your are looking? HTH Chazz |
| Navigation |
| Message Index |
| Next page |