| The Shop > Tools |
| Harrison L5 rescue |
| << < (47/47) |
| Biggles:
thanks Jonny, i will lookout for them, i think the fibre gear was just their for the noise, otherwise they would have made them in different sizes to fit the translation gear changes. :thumbup: |
| vintageandclassicrepairs:
Hi All, I just spotted some 14DP gears on Ebay (rusty but cheap???) http://stores.ebay.co.uk/The-Plane-Iron-Shop?_dmd=2&_nkw=14DP HTH John |
| awemawson:
That ad. is Tim & Digger at G&M Tools in Ashington (West Sussex) - dealt with them for decades ! |
| Biggles:
awemawson, vintageandclassicrepairs, i live between Epsom and Kingston. ref; the gears advertised by G&M. i have had a few for spares but they did not have the specific ones i am after. 40, 63, and 127. These are required for metric threads. I am in the process of stripping the lathe down and repairing it along the lines of mick of this thread. Therefore I will start a new thread when I have got a few days behind me and found out what needs to be done. One thing is for sure; screws and nuts are hacked and need replacing, assuming I can get them off. :nrocks: |
| tom osselton:
Maybe message Doubleboost he had the 127 division dividing plate made up. |
| Navigation |
| Message Index |
| Previous page |