The Shop > Tools
Harrison L5 rescue
Manxmodder:
Cheers for that John,I'll measure up later and come back with the actual size.
The one on my Harrison has suffered from some brute bashing the face of it with a chuck key or similar implement,but these lathes have mostly been ex college training machines so nothing surprises me regarding the mindless damage often seen......OZ.
Manxmodder:
Hi John, the diameter of the recess in the plunger head measures 37.55mm,so 37.5mm would be safe.
I wonder if Mick has a dimension for the plunger on his L5, I can't imagine it being different.
Having said that,we are dealing with Harrison machines here so anything is possible :Doh:
....OZ.
John Stevenson:
Mick has 38mm for his and I now have decent photo's of the plates.
Manxmodder:
Very good John,if 38mm is the only option available I'll work around that.
whatever size Mick needs for his L5 has priority here.
Cheers, OZ.
Manxmodder:
Just a thought,some printers have a facility to print a design directly onto the front face of a CD.
I'm just wondering if it would be feasible to put a piece of brass into the CD print tray and print the etch resist directly onto the brass and then drop it into a ferric chloride bath....OZ.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version