Gallery, Projects and General > How do I??

DIAMOND GRINDING WHEELS

(1/2) > >>

Mr.B:
How do you clean the surface of a diamond grit grinding wheel.
Can anyone enlighten me?

Bernard (the owner of a dirty faced wheel)

Stilldrillin:
Bernard,
Brake & clutch cleaner, is good for that type of cleaning job. 

This is the one I use.     http://www.ebay.co.uk/itm/6-X-BRAKE-AND-CLUTCH-CLEANER-400ML-SPRAY-CAN-AUTOCARE-/400162617646?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d2b8cf92e

I wouldn't be without a can, or two, in the workshop.  :thumbup:

David D

hopefuldave:
Good stuff, but way cheaper in a 5 Litre can from a motor factors near you!

N.B. motor factor != "Halfrauds"

Dave H. (the other one)

Stilldrillin:

--- Quote from: hopefuldave on July 05, 2012, 06:00:56 PM ---Good stuff, but way cheaper in a 5 Litre can from a motor factors near you!

N.B. motor factor != "Halfrauds"

Dave H. (the other one)

--- End quote ---

Hmmm...... Thanks Dave!  :thumbup:

I'd forgotten. I used to obtain tricho in those quantities from work, when I did!

These days I use much smaller quantities, on much smaller widgets. Usually before loctiting.

The aerosol, wet blast is a useful feature too......

David D

Doc:
To clean a diamond or CBN wheel it is best to use a cleaning stick.
Here is what I am talking about.
Diamnon/CBN cleaning sticks
After cleaning your wheel will preform as it did when it was new.

Navigation

[0] Message Index

[#] Next page