| The Shop > Tools |
| He can be taught |
| (1/1) |
| SPiN Racing:
Wanted to thank the guys here... I HAVE been listening. Today I picked up a set of Parallels!!! http://www.wttool.com/product-exec/product_id/17584/nm/10_Pair_Thin_Style_Parallel_Set_WT_Import_ Yes I joined the bronze age, and got modern! No more taking scraps of steel and hoping they are parallel when putting them under things in the vise! I also got a couple of MT2 Tapers for the projects in the works. One is MT2 To JT6... I figure that is stout enough I may use it for my Tapping endeavors. Since it was $3.00 US. (They dont have a pic for it) I also got a MT2-5/8-16 arbor... that I may end up using in the Peck Drill. http://www.wttool.com/product-exec/product_id/37033/nm/Threaded_Drill_Chuck_Arbor_WT_Import_ OH and a Mag base for the Camera Mount! :proj: Once again.. thank you for all the tutorials.. it truly helps. Two main tools to get so I can increase base functionality... Machinist Squares, and one of those dial indicators with the J curve tip.... I have a Starret square.. but its more of a carpenter one in that it slides.. and is I think 16". Has a bubble level as well. |
| Navigation |
| Message Index |