| Gallery, Projects and General > Gallery |
| A Low Profile CNC Tool Height Setter. |
| << < (5/5) |
| Tweakie:
Hi Eric, It is my intention to make this whole project 'open source', with all the drawings and CNC files made freely available on my website so that others who may be interested can make one (or something similar) for themselves. I still have some work to do on the layout for the control board and more testing under varying conditions before it is finally ready but I am getting there slowly. Tweakie. |
| cnc-joe:
Hi Tweakie, - Hey, I'd be very interested in making a probe like this. - Have you had any luck in finishing the design/drawings up? - As always- thanks for sharing your work with the rest of us. CNC-Joe |
| Tweakie:
Hi Guys, Although it was my original intention to make this an ‘open source’ project for anyone to construct, commercial interest was shown. They took their time deciding but following a reasonable offer I have now sold the design. Tweakie. |
| Brass_Machine:
--- Quote from: Tweakie on January 28, 2013, 01:35:05 AM ---Hi Guys, Although it was my original intention to make this an ‘open source’ project for anyone to construct, commercial interest was shown. They took their time deciding but following a reasonable offer I have now sold the design. Tweakie. --- End quote --- Congrats on that Tweakie! Always awesome to make a little cash. :beer: Too bad tho, I was looking forward to making one! :zap: |
| Navigation |
| Message Index |
| Previous page |