Gallery, Projects and General > How do I??
Digital Angle Gauge won't reset after battery change...
<< < (7/7)
DavoDavo:

--- Quote from: Bunezki on August 07, 2012, 07:38:59 PM ---
--- Quote from: DavoDavo on June 05, 2012, 04:21:02 AM ---Hi guys,
I'm hoping someone will come up with a fix for my Digital Angle Gauge, it's the same as this one (http://www.ebay.com.au/itm/Digital-Bevel-Box-Inclinometer-Angle-Gauge-Meter-Protractor-360-Magnets-Base-/270985840582?pt=LH_DefaultDomain_15&hash=item3f1803c7c6#ht_4553wt_1150).

It came with batteries (3 x CR2032) installed and worked fine until the batteries died, but I didn't notice the dead batteries due to a house move a year ago and only a few weeks ago saw no display when I went looking for it.
Putting three new batteries in just gives me a permanent display of all the characters that the LCD has. I thought maybe that I was glitching it when the batteries were going in so tried many times after suitable in-between long wait times (that usually fixes my digital calipers when I put new batteries in them).

I took the back off and tried using a 9V battery instead of the 3 CR2032's in case it was somehow because of the way I was putting the batteries in but despite trying many, many times I still get the same display and no reset.  :(

Does anyone have any ideas? I'm loath to throw it away unless I really have to.   :doh:

--- End quote ---
Check please Xtal 32,768 kHz (it is a little cylinder near chip).
Good luck.

--- End quote ---
OK, how do I check the Xtal? And where would I get a replacement if it is bad?  :scratch:
John Swift:

Hi Dave,

the 32.768 Khz crystal is used in watches and is available from Jaycar Electronics  CAT. NO. RQ5297

      John
DavoDavo:

--- Quote from: John Swift on August 08, 2012, 10:22:07 AM ---
Hi Dave,

the 32.768 Khz crystal is used in watches and is available from Jaycar Electronics  CAT. NO. RQ5297

      John

--- End quote ---
Thanks, John.  :beer:
Might be worth a try.
I'll order one from the local agent and have at it. :dremel:
Navigation
Message Index
Previous page

Go to full version