The Shop > Tools
Help Req buying Rotary table
HS93:
Hi Chaps i am looking for a small rotary table , it's to be used with my mini mill and at some time I would like to be able to fit a low profile chuck so the table has to be low ish in hight.I have looked at vertex http://www.rdgtools.co.uk/acatalog/Rotary_Table.html and HBM and Shoba and was wondering if anybody had any experiance I want to buy once so dont mind spending to do it than get a cheap one that may need replacing, it is only going to be used for light work brass and ally and plastic.
any prefrences ?? :doh:
Peter
:ddb: :ddb:
sbwhart:
Hi Peter
I bought a Vertex from RDG the only thing I could advise is buy the bigest you can. There a very usefull bit of kit. I vitted mine up with a jacobs chuch as a cheep and cherfull attachment not as good as a chuck but it met my requirements I also fitted a aluminium sacrivical top on the table with clamp holes to hold odd shapes, you can see it in use on my Loco build thread under projects.
Cheers
:wave:
Stew
bogstandard:
I thought you would have gone for one of these Peter.
http://www.arceurotrade.co.uk/Catalogue/Workholding/Rotary-Tables
John
raynerd:
http://www.rdgtools.co.uk/acatalog/Rotary_Table.html
The 4" vertex seems a good price at £125 but when I was RDG last week I also saw that some of these RT can have their handle removed and a dividing plate and attached - I don`t know if this applies to the vertex RT. It would seems like quite a useful function for gear cutting and such...?
With the X2 having limited Z travel, I`m concerned that with a vice on top, will there be enough clearence?
And while I`m asking my 101 questions - I may as well throw in the idea of value for money, the 4" vertex is £125 yet the no brand at RDG is £60! For light work - brass, ally and such, is the vertex worth the extra.
If anyone has any comments on RT`s suitable for an X2 mill please do post - I`m just doing my research before buying one.
Chris
Bluechip:
Peter
This is a 110mm you can fit div. plates to. I have a 6" Vertex ( looks exactly the same as the Axminster 6" !!), with plates and tailstock. Got 'em about 4 yrs ago, the lot for £90. Closing down sale at a place near Gloucester .. so no good sending you there eh ::)
http://www.axminster.co.uk/product-Axminster-110mm-Deluxe-Rotary-Table-453684.htm
Dave
Navigation
[0] Message Index
[#] Next page
Go to full version