Gallery, Projects and General > Project Logs
Resurrection Time Again.......
(1/2) > >>
Stilldrillin:
As most of the workshop and home, round toits are now sorted. It's time to make a start on this year's resurrections, from the orphanage.  :thumbup:

This one took no time at all......... It's scrap!




This big wobbler took an hour or so........






Time to start on Robbo......
You've all seen the story, up to pres..........   http://madmodder.net/index.php?topic=6110.0

First off. I don't like relatively thick wall, brass hot caps........




Too much heat can pass to the cool end.
So, I sawed it off, to replace with a piece of steel vacuum cleaner pipe......




I noticed the original end cap was concave copper, and painted black, to absorb the heat.
A rub with emery highlighted the hammer marks........




I radiused a piece of delrin, and gave it a tap, or two........




Looks good now........




Carefully parted off, just behind the cap........




Bored the cool end 1/8" deep to take the chrome pipe, and cap.
Looks ok, I think.........




I emeried away the chrome, and silver soldered the cylinder in place........




Then after a clean up, replaced the original copper cap......




Another clean, and a quick assemble. I think they look made for each other......




Not a bad day's work.......




Need to sort out how to make a lightweight displacer now, cos I don't like the wasted volume of the regenerator.

It's nice to be back to it again!  :D

David D
Dean W:

--- Quote from: Stilldrillin on May 09, 2012, 04:24:36 PM ---It's nice to be back to it again!  :D

David D

--- End quote ---

Good to see you back to it too, David.  That hot cap looks better than new!
I think you had a good day, all told.  : )
Stilldrillin:
Thanks Dean!
The bundle of bits was sent to me from Australia, as you know. To be auctioned for the Junction 26, Children's Hospice Appeal.

Like me, you also realised it was beyond any sensible hope of running........  :palm:

I fretted, all winter..... What  would the owner think?  :scratch:  :(

I sent him this pic, and an explanation. I'll giveŁ10 to the charity, and call it Stilldrillin's Failure.......




Bless him! He fully understood. Told me to bin it, and promised to match my tenner!   :D

My Scottish pal rang, that evening. He has a fetish for these 'orrible things......
I'm posting it up north, and he's also giving a tenner!  :D

Thirty pounds, for the Children!  :bugeye:     

The oscillator is to be auctioned too.


What a lovely, caring collection of friends we are..........   :clap: :clap: :clap:


David D


Bluechip:
Dave SD

Want this for your auction ??

J-Tech 1/4" drive socket set.

4-14mm sockets.

+ ph, torx, hex & pzd bits.

Can't seem to do piccys on a PM ..  :doh:

Might raise a quid or 2 .. It's very nearly new .. unlike myself ...  :(

BC

Stilldrillin:

--- Quote from: Bluechip on May 10, 2012, 03:12:17 AM ---Dave SD

Want this for your auction ??

--- End quote ---

Can a duck swim?  :D

Dave. Haven't I always said yer a GEM?  Thank you very much!  :thumbup:

The big day is June 2nd. I'll be posting details, nearer the time.

Thanks again Mate! 

David D
Navigation
Message Index
Next page

Go to full version