Gallery, Projects and General > Gallery

Brush cutter head

<< < (3/3)

mzt:
Lines are no use among strong bushes, and blades break too when threre's stones among them. Having nobody within hitting range is a rule nobody should break.
Wearing proper equipment, too.
YES, them rotating chainsaws are scary.
I've had several links snapping: being attached on both ends prevented (note: prevented, not prevents) them from flying from the head.
Of course, as soon as I felt one of them was snapped (and good news are You feel the difference in no time) I replaced the broken link with a new one.
Nothing would prevent a link pin from bulleting in whatever direction, of course: using them at the minimum required speed (which is far below the max revs) moves the needle a bit towards the 'safe' side on the dial, without leaving the red zone.
I would have troubles considering that thing "safe" if it were locked in a drawer.

Thank You for the heads up.

Marcello

Navigation

[0] Message Index

[*] Previous page

Go to full version