| Gallery, Projects and General > Project Logs |
| Cutter grinder |
| << < (2/2) |
| Gerhard Olivier:
Hi Stew Just started new job - never been so busy before so no me time. This project is in the completed for the moment stage. Just completed as is with a base in front of eash wheel so the pillar and the tool holder has to be moved from the coarse wheel to the med and fine wheel, it is a bit of a pain and I fully intend to mod it later but for now it works a treat. I only sharpen lathe tools no milling cutters or fancy bits. I need to make a tumbler reverse for the 9x20 lathe next ( My lathe is in the house(study) and I need to be able to keep the noise down.) but will start a new tread for that. Gerhard |
| sbwhart:
Hi Gerhard Thanks for the up date hope the new job is going well. Stew |
| Navigation |
| Message Index |
| Previous page |