| Gallery, Projects and General > How do I?? |
| No Volt Release Switch |
| (1/2) > >> |
| doubleboost:
Hi This switch arrived today for my mill :) :) :) No wiring diagram :doh: :doh: :doh: :doh: :doh: Anyone got a diagram for it i have tried google with no decent results John |
| Bluechip:
John Just looks like a 3-phase thermal overload type contactor from that pic. They just go straight across usually, ie 11 - 12 etc. etc. looks like it drops out @ around 10A. No coil connections ??? You using it on 3-phase ?? BC |
| doubleboost:
Hi BC It is just a 3 way on off switch like you say no coils It will do the job untill a propper one turns up John |
| Bluechip:
John Just dangle a meter on it. 11-12: 21 -22: 31-32: I would surmise you will get continuity on all 3. If any pole overloads, then all 3 should drop out .. Usual stuff .. :zap: BC |
| John Rudd:
I'm not sure its the usual NVR... :zap: I bought one similar( not the same... althought it is meant for 3ph) and its defo not an NVR, whne I press the go button( without any ziggies on it) it latches which suggests its an on - off switch....Do be careful... :coffee: I like talking to you guys... :clap: |
| Navigation |
| Message Index |
| Next page |