The Shop > Electronics & IC Programing

lathe gone bang

(1/3) > >>

krv3000:
HI all don't no if this belongs in this bit but her goes the forward and revers switch on me lathe has blown up to things i need is a new switch and a wiring diagram to re wire the new switch up i have tried to just link up the motor so i wood have the lathe ruining but no go I'm no good with electricity their is two blacks 1 brawn and 1 blue the blue goes to the capacitor as to the rest i give in can any one give me a diagram to wire this up with just a off and on switch and where can i get a new forward and revers switch from right the lathe is a emco compact 8 any help wood be gratefully received       

Jasonb:
Pro Machine Tools should be able to source a new switch, in the past they have got me parts from Austria for my Emcomat 8.6 when I had that

http://www.emcomachinetools.co.uk/Home/tabid/36/List/1/Default.aspx

Parts list and diagrammed

http://www.emcomachinetools.co.uk/LinkClick.aspx?fileticket=jsr1EnznjKY%3d&tabid=260&language=en-GB

krv3000:
HI jason i have the parts list and the diagram of the parts but their is no wiring diagram and last time i got in touch with the people you have listed i got no reply from them and i did try and get in touch with them More than once

Bluechip:
Bob

Send a piccy .... if you can.

There should be 2 connections to the start capacitor .. :thumbup:

Do you want a generic diagram of a 1 ph cap start motor ??

Simple enough ..

The 'cap / switch / start winding' may be in any order, just a series circuit.

 Dave BC

krv3000:
Hi bluechip yep i will post sum pics as soon as i can i no nothing regarding the black art of electrics the switch was faulty when i got the lath so i put a septet on off switch to the feed in will post pics tomorrow thanks for the help

Navigation

[0] Message Index

[#] Next page