The Shop > Electronics & IC Programing
lathe gone bang
krv3000:
HI all don't no if this belongs in this bit but her goes the forward and revers switch on me lathe has blown up to things i need is a new switch and a wiring diagram to re wire the new switch up i have tried to just link up the motor so i wood have the lathe ruining but no go I'm no good with electricity their is two blacks 1 brawn and 1 blue the blue goes to the capacitor as to the rest i give in can any one give me a diagram to wire this up with just a off and on switch and where can i get a new forward and revers switch from right the lathe is a emco compact 8 any help wood be gratefully received
Jasonb:
Pro Machine Tools should be able to source a new switch, in the past they have got me parts from Austria for my Emcomat 8.6 when I had that
http://www.emcomachinetools.co.uk/Home/tabid/36/List/1/Default.aspx
Parts list and diagrammed
http://www.emcomachinetools.co.uk/LinkClick.aspx?fileticket=jsr1EnznjKY%3d&tabid=260&language=en-GB
krv3000:
HI jason i have the parts list and the diagram of the parts but their is no wiring diagram and last time i got in touch with the people you have listed i got no reply from them and i did try and get in touch with them More than once
Bluechip:
Bob
Send a piccy .... if you can.
There should be 2 connections to the start capacitor .. :thumbup:
Do you want a generic diagram of a 1 ph cap start motor ??
Simple enough ..
The 'cap / switch / start winding' may be in any order, just a series circuit.
Dave BC
krv3000:
Hi bluechip yep i will post sum pics as soon as i can i no nothing regarding the black art of electrics the switch was faulty when i got the lath so i put a septet on off switch to the feed in will post pics tomorrow thanks for the help
Navigation
[0] Message Index
[#] Next page
Go to full version