Gallery, Projects and General > How do I??
Drill holes in a bolt circle
Bernd:
Why am I asking this? Check out this THREAD first.
As I said I was going to ask this question here and see how many can come up with an answer. The criteria is that you can't use an indexing head or DRO. Since I don't have an indexing head I can't use that. But my Bridgeport does have a DRO, but I'm not going to use it.
The piece that will need the holes is the side of the bull gear (minus it's teeth) in this pic.
This will be a bit of a tip for the newbies. I'm sure some of you old pharts know how to do this. So let the answers begin.
Bernd
Darren:
If you hadn't machined the teeth off the gear? Use another gear?
sbwhart:
Hi
I'd use another gear.
This is a cheap and chearfull devider I made when I first started up, spent a load of cash on other bits, neaded to divide a part up, got hold of a gear with 12 teath this gave me 2, 3, 4, 6, divisions, I still use it from time to time quick and easy to set up just grip it in the vice. Job Sorted :thumbup:
Cheers
:wave:
Stew
Darren:
Stew, you forgot one :scratch:
Bernd:
Nope, can't use a gear.
We are going to create this from scratch. :smart:
By the way the number of teeth on the bull gear "was" 76. Not a very divisable number once you get past 4 positions.
Bernd
Navigation
[0] Message Index
[#] Next page
Go to full version