| Gallery, Projects and General > The Design Shop |
| Rolling Mill |
| << < (2/4) > >> |
| David Jupp:
You can get the rolls from these people http://www.sheffieldforgemasters.com/engineering/home See the back-up roll in the image on the linked page. They can also provide castings to your design for the housings for the roll stacks. You might need a slight extension to the workshop to fit this stuff in though! |
| sbwhart:
Ok a little bit of explination is required I'm thinking of building a model of a rolling mill using a twin cylinder horizontal engine to power it:- it won't have any practical work shop use. Stew |
| andyf:
This mill is probably a bit too modern: Here's another, found by searching on YouTube for "Steel rolling mill Sheffield" Andy |
| sbwhart:
Thanks guys some good info their I've got something to work with. Don't know when it will kick off though I've got plenty to do at the moment. Stew |
| Stilldrillin:
--- Quote from: sbwhart on March 23, 2012, 09:28:01 AM ---Ok a little bit of explination is required I'm thinking of building a model of a rolling mill using a twin cylinder horizontal engine to power it:- it won't have any practical work shop use. Stew --- End quote --- Aaawww......... David D |
| Navigation |
| Message Index |
| Next page |
| Previous page |