| Gallery, Projects and General > Gallery |
| Something I recently worked on.... |
| << < (3/3) |
| doubleboost:
Hi David Very nice looking bits of kit Sadly i am also from the MK2 escort era A post on anodising would be very welcome John |
| DavidBraley:
Eric, The plates are machined from 6061-T6 and the hardware is stainless. The washers under the stainless bolts you see on top I machine from 303 Stainless bar stock. John, I have a project coming up in a few months that will need some Anodizing. It's for a personal project I'm working on. I'll take some pictures then and post up a thread of my steps. I even have an interest in doing some Zinc plating here for hardware. If I ever get that going I'll share that too. Take care, David |
| Navigation |
| Message Index |
| Previous page |