Gallery, Projects and General > Gallery

a wot not

(1/2) > >>

krv3000:
HI i made this up today sum pics

krv3000:
OK the rest of the pics its for cleaning out the Morse taper on the lathe Head the brush it self started out as a brush for cleaning  drinking glasses but the Handel was plastic with a Handel on it which prevented from gowning threw the head stock  turned dawn a length of broom Handel to 19 mm OD and their you have it

DaveH:
Bob,

Hey, Hey, Hey ........... a very clever idea  :clap: :clap: :clap:

 :beer:
DaveH

mklotz:
Along the same lines...

Go to your local gun shop and buy a cleaning mop for a 12 gauge shot gun.  Fit it to a handle and you've got a great mop for cleaning the taper on the tailstock.  The fuzzy material used for these mops has an almost magnetic attraction for swarf.

krv3000:
HI well thanks for the tip but gun shops are a bit thin on the ground where i live as the brush was only £1 nothing to loos 

Navigation

[0] Message Index

[#] Next page