| Gallery, Projects and General > Gallery |
| a wot not |
| (1/2) > >> |
| krv3000:
HI i made this up today sum pics |
| krv3000:
OK the rest of the pics its for cleaning out the Morse taper on the lathe Head the brush it self started out as a brush for cleaning drinking glasses but the Handel was plastic with a Handel on it which prevented from gowning threw the head stock turned dawn a length of broom Handel to 19 mm OD and their you have it |
| DaveH:
Bob, Hey, Hey, Hey ........... a very clever idea :clap: :clap: :clap: :beer: DaveH |
| mklotz:
Along the same lines... Go to your local gun shop and buy a cleaning mop for a 12 gauge shot gun. Fit it to a handle and you've got a great mop for cleaning the taper on the tailstock. The fuzzy material used for these mops has an almost magnetic attraction for swarf. |
| krv3000:
HI well thanks for the tip but gun shops are a bit thin on the ground where i live as the brush was only £1 nothing to loos |
| Navigation |
| Message Index |
| Next page |