The Craftmans Shop > Radio Control Models

Small belt drive for model boat

<< < (5/5)

HS93:
window frames, they are only 23 x 12 mm and 12 x 9 mm the rivets are 1/32 he has not decided if he is going to want rivets in them or not, hope not, lot of holes.its 0.06 brass. and I had to cut them up on mill as the brass was curling. :bang: must finnish the CNC

Peter     :ddb:

HS93:
dont know why I cannot post more than one picture at a time  :ddb:  :zap:

bogstandard:
Looks like the byte size of the pictures is too large for more than one Peter.

If you can knock them down in DPI, they will usually get a lot smaller byte wise. It tend to make them 150 DPI at the most.


John

Navigation

[0] Message Index

[*] Previous page