| The Craftmans Shop > Radio Control Models |
| Small belt drive for model boat |
| << < (5/5) |
| HS93:
window frames, they are only 23 x 12 mm and 12 x 9 mm the rivets are 1/32 he has not decided if he is going to want rivets in them or not, hope not, lot of holes.its 0.06 brass. and I had to cut them up on mill as the brass was curling. :bang: must finnish the CNC Peter :ddb: |
| HS93:
dont know why I cannot post more than one picture at a time :ddb: :zap: |
| bogstandard:
Looks like the byte size of the pictures is too large for more than one Peter. If you can knock them down in DPI, they will usually get a lot smaller byte wise. It tend to make them 150 DPI at the most. John |
| Navigation |
| Message Index |
| Previous page |