Gallery, Projects and General > Project Logs

X2 CNC mill overhaul

<< < (3/7) > >>

tumutbound:
I'd thought of reversing the stepper on the Y axis but using a piece of aluminium channel, say 80x40, for the mount , This would provide protection for the belt. Not sure what wall thickness would be required for rigidity.

z3t4:
Thanks for putting this thread up. I would very much like to CNC my X3 (it's on this year's list) but have no relevant skill and there appear to be no 'conversion kits' here in Blighty. So your WIP will be very interesting...

Regards,

John

Rob.Wilson:
 :)  good to see you back in the shop Eric  :thumbup: 


 Your post reminds me I have a CNC build  I should be getting on with :palm:


Rob

DaveH:
Good start Eric  :clap: :clap: :clap:
 :beer:
DaveH

Brass_Machine:
I ordered the larger base from LMS for their HiTorque mill.



This should give me more range in the Y axis. It is also a bit heavier. So, I am going to hold off on finishing up the Y bearing/motor mounts and start on the X. Going to see if I can start it tonight.

X axis will include; a longer acme screw, an acetyl nut and new motor mounts. I am going to gear the motor like the Y axis is.

Eric

Navigation

[0] Message Index

[#] Next page

[*] Previous page