Gallery, Projects and General > How to's

How to clamp these up

<< < (2/4) > >>

Fergus OMore:
'Who is Rob, who is Rob?' said he waving his wooden leg aloft!

Rob is the gent wot makes 'contraptions' on his shaper to clamp things.

He's a gobbling mortar rater- or summat :smart:

spuddevans:

--- Quote from: MadNick on February 09, 2012, 07:44:40 AM ---Thanks Norma Jean,

Who is Rob and where can I find info on his clamp setup?

N

--- End quote ---

I think he's referring to Rob Wilson, and here's one of his build threads

http://madmodder.net/index.php?topic=6731.0

Hope this helps

Tim


EDIT: I fixed your link so that your pic shows up in the post :thumbup:

MadNick:
Thanks for your help.

Nick

BillTodd:
Clamp a 3 jaw chuck onto the mill table.

Bill

Fergus OMore:
It's too cold and damp to finish off a set of clamps for an interesting fixture to sharpen slitting saws on my Clarkson.
So, earlier I mentioned the use of wood. Perhaps the excellent web site of Frank Ford called Frets.com machining will illustrate several workholdings with one using wood inserts on one of his vices.

I'll NOT be more specific as almost all of Mr Ford's improvements etc are of immediate or future use to most newcomers. Read -and learn.

'Norma Jean'  :wack:

Navigation

[0] Message Index

[#] Next page

[*] Previous page