| Gallery, Projects and General > Project Logs |
| First mini lathe project, oscillating steam engine. |
| << < (5/22) > >> |
| mklotz:
If you have a 64 bit system now you will need DosBox (free download) to run legacy DOS programs. Regardless, a 4jaw is much more secure than redneck shimming in the 3jaw. |
| NickG:
Thanks Marv, I think you have told me that before, I must be losing my marbles! |
| doubleboost:
Hi Ross 4 jaw chuck is the way to go The more you use them the easier it becomes I often use a 4 jaw for round stock just to save changing the chuck John |
| Ross:
Had a few hours spare today, I cut, filed and marked out the main plate that everything will be fastened to. I've just got to sit down and work out tapping drill sizes for some of the threaded holes. I started Turning the outer edge of the base down to size so it can fit in the clamp of the drill press. Meanwhile, I've ordered the adapter plate for my 4-jaw chuck. If all goes well I should be up to drilling the cylinder by the end of the week. |
| Ross:
I got the backplate machined for the four jaw Chuck. But I now need to put the workpiece off set. I've never done this before, so whats the most effective way of doing this? |
| Navigation |
| Message Index |
| Next page |
| Previous page |