| Gallery, Projects and General > The Design Shop |
| Foden 3" scale steam wagon by T.Morris |
| (1/1) |
| steamman:
:bang: Can anyone tell me where I might find a full set of build instructions for this engine,The reeves2000 site says to use Model Engineer volumes 139 & 140,however these only go up to Part 12,does anyone no why as this model is only about 50% complete . Any help or information regarding the build or modifications will be gratefully received.Thanks Also can anyone tell me how to upload photos to this site as I have had many requests to do so ,I have many digital images that I can send Thanks steamman |
| Jasonb:
There were only the 12 parts to the article he never did a complete build Have a look at the top of the Gallery section for how to post photos http://madmodder.net/index.php?board=11.0 J |
| Mike Cole:
Have you looked at www.Tractiontalk, there might be some one on there who has build this engine. If you do have a look, then have a look for keithcat (thats me ) Little Samson engine. Mike |
| HS93:
is this the corect site http://www.tractiontalkforum.com/index.php ? Peter |
| Jasonb:
Yes thats the right one, they have quite an active miniature section and the main full size forum is good as well. Though I think most on there have 4 1/2" Fodens with the odd 6" as well. Alan Marshall's site is also useful http://homepage.ntlworld.com/alanet.marshall1/TE-page/Foden/foden.htm J |
| Navigation |
| Message Index |