« previous next »
Pages: [1]   Go Down

Author Topic: Shoda Live Center  (Read 4730 times)

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Shoda Live Center
« on: March 12, 2010, 08:41:49 AM »
My local scrap man just knocked on my door and dropped a very nice SHODA 2MT live center in my hand  :ddb:

It looks a very nice bit of kit and stripable and adjustable by the look of it.

Doing a Google it seems that Shoda is made in the Czech Republic

It sure pays to tell everyone what you are about  :)

The sad news is there was a whole machine shop sent off for scrap, all scrap too inc machines. He got wind it it too late and only came away with this live center and a truck full of scrap metal :(
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)

Offline Shepherduke

  • Jr. Member
  • **
  • Posts: 35
Re: Shoda Live Center
« Reply #1 on: March 12, 2010, 10:06:13 AM »
  That's the story of my life too!  ATB Kevin
Logged

Offline John Stevenson

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1643
  • Nottingham, England.
Re: Shoda Live Center
« Reply #2 on: March 12, 2010, 10:38:09 AM »
Don't stutter it's SKODA as in the cars but unlike all the early Skoda jokes their machine tool industry is / was top notch.

You won't buy a better live centre.

John S.
Logged
John Stevenson

Offline rleete

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 534
  • Country: us
Re: Shoda Live Center
« Reply #3 on: March 12, 2010, 11:39:14 AM »
Skoda was one of the main reasons the Germans invaded in WWII.  Hey, if the Germans think your machine tool industry is worth invading over, it's gotta be good.
Logged
Creating scrap, one part at a time

Offline Darren

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 3795
  • N/Wales
Re: Shoda Live Center
« Reply #4 on: March 12, 2010, 08:32:08 PM »
Thanks John, now everyone knows I have a Skoda  :doh:

Just found this with an exploded diagram, they seem to have gone to some trouble to make this well, who'd have thought there would be so much inside a live center. Long shaft, three adjustable bearings and an oil hole. 
http://dev.sowatool.com/US/images/promotionPDFS/USAC08_Cat.pdf
« Last Edit: March 12, 2010, 08:33:56 PM by Darren »
Logged
You will find it a distinct help… if you know and look as if you know what you are doing. (IRS training manual)
Pages: [1]   Go Up
« previous next »