The Craftmans Shop > Backyard Ballistics

Need some 6-40 screws

(1/2) > >>

black85vette:
Have a pistol project going and need some 6-40 screws in either flat or button head.  I have found them in gunsmith kits with lots of other screws but not separate.  Tried McMaster Carr but no luck.   Anyone have a source for odd ball screws?

75Plus:
Brownell's has them. They are 1" long but it is easier to shorten than lengthen.

http://www.brownells.com/.aspx/pid=394/Product/FILLISTER-HEAD-SCREW-KIT

Joe

WillieL:
I'm assuming you only want to pay for 3-4 screws instead of buying a full package?

http://www.amazon.com/Black-Oxide-Alloy-Socket-Length/dp/B005DSAEW8

black85vette:
@WillieL - not looking for 3-4.  10-15 would have been perfect.  But I ordered the 100 from Amazon.  Can always use them for other projects.  Just have to keep a 6-40 tap on hand.  The vendor looks good.  I bookmarked their website.   www.smallparts.com

@75Plus - I had seen those but didn't want to order a 250 piece kit.   I tried most of the gunsmith sites first

Thanks for the help!! :thumbup:

75Plus:
You can buy "Refill" packets in any of the sizes that are in the whole assortment.

Joe

Navigation

[0] Message Index

[#] Next page