| Gallery, Projects and General > The Design Shop |
| Sprung loaded tee nuts and aluminium profile sections recommendations |
| << < (2/2) |
| bry1975:
Hi there, Ermm just making a prototype first as not sure if the design will take off. Ideally want one or a few 20mm x 20mm x 100mm length of the T slot type. I'd say a M5-M8 thread would be ok. Do you have access to ball bearing or spring tension T nuts? TIA Bry |
| Scuba1:
I have the ones with the spring "lip" type in threads from m5 to m8 and i'll have a look around what sort of off cuts we have in the t profile ally stuff ... I am not going to be back in the workshop till wednesday morning though but will have a look then. Michael |
| bry1975:
Thanks Michael. Yes please have a look around as they'll be interesting to try out. Bry |
| Scuba1:
PM me your post addy and i'll send you some over |
| Navigation |
| Message Index |
| Previous page |