Gallery, Projects and General > The Design Shop

Sprung loaded tee nuts and aluminium profile sections recommendations

(1/2) > >>

bry1975:
Chaps,

Can any of you recommend a good value aluminium profile section supplier and sprung loaded tee nut supplier?  I'm working on a new hand tool and basically want snug fitting tee nuts that will slide down aluminium profile section like below with very little wobble.



TIA Bry

Tony Wells:
I don't know of the availability over there, but you may get some ideas at least here:

http://www.8020.net/

Bluechip:
Bry

There are any number of UK suppliers ... we used one in Leicester IIRC.

A search not come up with one ???  I can't believe that.

I have a length similar to your pic. here, but be aware that no profile is all that accurate .. it's not meant to be.

Depends what you expect from it.

It ain't cheap.

BC

EDIT ..

This might just be the people, but the name rings no bells. Same outfit, different name ??? Who knows.

http://aluminium-profile.co.uk/

BC

bry1975:
Thanks chaps,

I will try the links suggested.

Bry

Scuba1:
What thread size nuts and how many do you need as i may be able to help out there

ATB

Michael

Navigation

[0] Message Index

[#] Next page