Gallery, Projects and General > Project Logs

Mill power feed project...

<< < (3/3)

John Hill:
Hi Dean, I am sure that would work but is seems quite secure held with a piece of spring steel.  However I am working on a dog clutch which will allow me to keep the worm in mesh all the time.

Dean W:

--- Quote from: John Hill on January 12, 2012, 12:11:08 AM ---Hi Dean, I am sure that would work but is seems quite secure held with a piece of spring steel. 
--- End quote ---
Oh, I didn't notice that spring, John.  I thought it was just on some kind of swiveling stud.

John Hill:
Work continues on the dog clutch for my power feed project....

http://flic.kr/p/bdDobi

...Sally Shaper nibbles away at the internal spline for the sliding part of the clutch.

dsquire:

--- Quote from: John Hill on January 16, 2012, 03:48:08 AM ---Work continues on the dog clutch for my power feed project....

http://flic.kr/p/bdDobi

...Sally Shaper nibbles away at the internal spline for the sliding part of the clutch.

--- End quote ---

John

Glad to see that you are keeping Miss Sally Shaper fed and in fine shape. I hope that Miss Liana Lathe is also receiving the same fine attention. 
:D :D
Looks like your making good progresss on this.  :)

Cheers  :beer:

Don

John Hill:
Oh yes Don, Sally Shaper will always have a place right up front for those little jobs and for the ones she can do better than any other such as this internal spline,  I only cut one but it will be quite enough I think.

I got the dog clutch working well but I have used up my quota of video uploads for the month so you will just have to take my word for it! :coffee: 

Now I need to make a little cover over the works before it winds my shirt tails in or somesuch. :palm:

Navigation

[0] Message Index

[*] Previous page