Gallery, Projects and General > Project Logs |
Mill power feed project... |
<< < (3/3) |
John Hill:
Hi Dean, I am sure that would work but is seems quite secure held with a piece of spring steel. However I am working on a dog clutch which will allow me to keep the worm in mesh all the time. |
Dean W:
--- Quote from: John Hill on January 12, 2012, 12:11:08 AM ---Hi Dean, I am sure that would work but is seems quite secure held with a piece of spring steel. --- End quote --- Oh, I didn't notice that spring, John. I thought it was just on some kind of swiveling stud. |
John Hill:
Work continues on the dog clutch for my power feed project.... http://flic.kr/p/bdDobi ...Sally Shaper nibbles away at the internal spline for the sliding part of the clutch. |
dsquire:
--- Quote from: John Hill on January 16, 2012, 03:48:08 AM ---Work continues on the dog clutch for my power feed project.... http://flic.kr/p/bdDobi ...Sally Shaper nibbles away at the internal spline for the sliding part of the clutch. --- End quote --- John Glad to see that you are keeping Miss Sally Shaper fed and in fine shape. I hope that Miss Liana Lathe is also receiving the same fine attention. :D :D Looks like your making good progresss on this. :) Cheers :beer: Don |
John Hill:
Oh yes Don, Sally Shaper will always have a place right up front for those little jobs and for the ones she can do better than any other such as this internal spline, I only cut one but it will be quite enough I think. I got the dog clutch working well but I have used up my quota of video uploads for the month so you will just have to take my word for it! :coffee: Now I need to make a little cover over the works before it winds my shirt tails in or somesuch. :palm: |
Navigation |
Message Index |
Previous page |