Gallery, Projects and General > Gallery

Christmas presents

<< < (3/3)

Powder Keg:
I made these also. They are Zipper pulls. I saw some on another website and came up with this design. I'll try and get a better picture and show the tool that I made to cut these. I made a formed tool. I just plunged it to full depth, drilled the part, polished the outside with a bit of scotch brite, then parted the piece off. I made the tool out of tool steel and heat treated it with a torch.



Thanks for the compliments,

~Wes~

Navigation

[0] Message Index

[*] Previous page