Gallery, Projects and General > Project Logs
Ball or Radius cutter
<< < (15/15)
Divided he ad:
Nice balls Nick  :thumbup:  :lol: 



Seriously though, Congrat's on the results  :nrocks:

The first one on the handle is almost an exact replica of my first attempt.... Still got it rolling round in the tool box draw, couldn't bring myself to throw it away.

The slight ogive you are getting is most probably due to the tool setting from the centre of the "turret" not the centre of the chuck.

If I may to refer to one of my own posts again (just to save me writing it all out again)  http://www.homemodelenginemachinist.com/index.php?topic=1721.45  About half way down I explain how I learned to set this type of tool for consistent results.  No need for pins and other things.


I hope that will help you and you can get them spot on.


You'll have fun making shapes with this.... Roll on handle bar clamps  :dremel: 





Ralph.
MadNick:
Thanks fellas,

Its only a simple thing but I do find it immensely satisfying.

Woking on those handlebar clamp designs as we speak...

Nick
Navigation
Message Index
Previous page

Go to full version