Gallery, Projects and General > Project Logs

Ball or Radius cutter

<< < (5/15) > >>

MadNick:
Evening,

Back on topic ;)

I cut the toolpost out this afternoon -



Theres quite a lot of work in this part alone. I need to profile the upright to sit just behind the cutting tip on both sides, machine a slot down the side to accomodate the fixing screws and work out how to machine a recess for the tool to reside in.

Then of course it has to be a nice tight fit in the slot that I am yet to machine in the turret - I might do that tomorrow.

Nick

philf:
Nick,

Before you cut the pocket for the insert have a look at http://mikesworkshop.weebly.com/ball-turner.html

When I eventually get round to making one I'll certainly incorporate his ideas.

Cheers.

Phil.

DaveH:
Looking good Nick  :thumbup:  :thumbup:  :thumbup:
 :beer:
DaveH

MadNick:
Thanks for the support :)

@philf how many ways can there be to make the same thing?!

Nick

Bert:
Hi all


  Simple answer!  If 10 people are making the same thing......10 different ways!!!

Regards....bert

Navigation

[0] Message Index

[#] Next page

[*] Previous page