| Gallery, Projects and General > The Design Shop |
| Radius Cutter |
| << < (3/3) |
| Fergus OMore:
I made mine out of scrap ends from George Thomas's Model Engineer's Workshop Manual and Jack Radford's Lathe Improvements and Accessories. So long as one can make a measuring thread- say 1/4" x 40 and have a dovetail cutter, it is fairly straightforward. But you can have a third bite at the cherry and if you build GHT's small dividing head instead, you can divide as well, and if you build the small DH, you can be craftier still and use it to drill from the saddle and if you a collet user, you can sharpen slot and end mills as a sort of encore. That is enough for me- at the moment. |
| MadNick:
Morning! Ive been through some of the threads and the links within and found them very interesting - a rich source of information. Thanks again. Nick |
| Bernd:
Nick, Here's a link to more than you'd care to know about ball turner's. Ball Turner Enjoy. Bernd |
| Navigation |
| Message Index |
| Previous page |