| Gallery, Projects and General > The Design Shop |
| Servo Motor Size |
| (1/1) |
| sparky961:
I've been wading through some servos for sale and I don't have enough experience with them to have a good feel for motor strength just going by specs. Here are specs from a set I'm looking at: DC38V 2A 30 W AT 1000 MIN -1 MAX STALL TORQUE 0.568 N.m Can someone give me an idea what these motors would successfully drive? The application I have in mind is an overhaul of my current stepper system driving the axes on my Craftex mill/drill/lathe. I already have about 1:3 (or 3:1 ?) gear reduction and would probably keep that the same, just replace the motors. Thanks! -Sparky |
| Navigation |
| Message Index |