Gallery, Projects and General > Project Logs
What I should have been doing :)
<< < (2/3) > >>
Xldevil:
Hello.
Your very nice holders look quite similar to mine,which I made according to the plans from H.Hall.
Combined with a crank handle they work perfect and make "life" a lot easier.
Btw.I bought a MT blank as well and simply bored it.
But now that I have finished my set over tailstock center this week,I'm looking forward to make my own morse taper next time.







img]http://up.picr.de/8956015vse.jpg[/img]





Cheers,Ralph
-steves-:
Excellent stuff, another very neat job   :clap:

Good little book that one, easy to follow and the tools are useful which is the main thing  :thumbup:

I am glad I am not the only one to have followed these  :thumbup:
-steves-:
Also made myself a couple of inexpensive DRO's. They have a megnetic back and are based on the follwoing article. They cost less than £10 each and have already been extremely useful, very very pleased with them  :thumbup: (http://start-model-engineering.co.uk/2011/08/micro-dro-for-less-than-10/)

A couple of pictures of mine, on the lathe and the mill. They remain stationary with strong magnets on them, until you wish to move them.





Stilldrillin:
Another nice piece of equipment to add to the growing collection!  :D

Nice to see you're roaming around, picking up hints n tips Steve.  :clap: :clap:

I think most of us followed John's developments, during the summer.......  :thumbup:

David D

arnoldb:
Good going Steve  :thumbup:

You'll find all these tools you're making will really help you in the long term; they later start to feel like old friends through use  :D

 :beer:, Arnold
Navigation
Message Index
Next page
Previous page

Go to full version