| The Shop > Tools |
| Rule of Thumb. |
| << < (4/4) |
| websterz:
--- Quote from: bogstandard on January 16, 2009, 03:29:50 AM ---Peter, I don't want to step on Dave's toes, but I think you are asking 'how long is a piece of string' with that one, and almost no-one could keep that much info brainstored, as there are too many variables. So here is a quickie link that gives a short explanation of a few of the variables and answers most of your question. http://maelabs.ucsd.edu/mae_ms/feeds_speeds.html But if you want to do a bit more research on it, type in 'machine feeds and speeds' into your favourite search engine. In fact over the years, I have seen a lot of charts that can be downloaded or screengrabbed, then just get them printed up and laminated and keep them handy in your shop. A lot of it is really down to experience plus a bit of trial and error. Hope this helps. John --- End quote --- Twice as long as half of it...another good rule of thumb. :med: |
| Navigation |
| Message Index |
| Previous page |