« previous next »
Pages: [1]   Go Down

Author Topic: mini rotab  (Read 6833 times)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
mini rotab
« on: November 19, 2011, 12:03:09 PM »
Thought I'd post up a pic of my mini rotary table made for small stuff..

Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline PeterE

  • Sr. Member
  • ****
  • Posts: 458
  • Country: se
  • Gothenburg
Re: mini rotab
« Reply #1 on: November 19, 2011, 12:36:24 PM »
That looks real nice  :headbang:

What are the dimensions?

BR

/Peter
Logged
Always at the edge of my abilities, too often beyond ;-)

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
Re: mini rotab
« Reply #2 on: November 19, 2011, 01:06:47 PM »
Ummm. you got me.....

The base part is 1in sq EN1, then 1/2 in base plate about 3in sq, then the disc is about 3 in dia from 1/2 in plate from memory...

I'll try and take some measurements if you really want to know......
« Last Edit: November 19, 2011, 02:11:22 PM by John Rudd »
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Rob.Wilson

  • Guest
Re: mini rotab
« Reply #3 on: November 19, 2011, 02:04:08 PM »
Looks a Handy bit of kit John  :clap: :clap: :clap: :dremel:


Rob
Logged

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
Re: mini rotab
« Reply #4 on: November 19, 2011, 02:12:05 PM »
Quote from: Rob.Wilson on November 19, 2011, 02:04:08 PM
Looks a Handy bit of kit John  :clap: :clap: :clap: :dremel:


Rob


Yay thnx Rob... :thumbup:

Its not often I get to post something interesting..... :D
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline AdeV

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 2448
  • Country: gb
Re: mini rotab
« Reply #5 on: November 19, 2011, 03:13:05 PM »
Very nice piece of kit John - is that a ball-turning handle sticking out of the side of it....?
Logged
Cheers!
Ade.
--
Location: Wallasey, Merseyside. A long way from anywhere.
Occasionally: Zhengzhou, China. An even longer way from anywhere...

Offline John Rudd

  • Hero Member
  • *****
  • Posts: 2531
  • Country: gb
Re: mini rotab
« Reply #6 on: November 19, 2011, 04:15:57 PM »
Ade,

The handle is for turning the table as opposed to a geared version that we are used to seeing...

Built for machining small parts like connecting rods for loco wheels where a small radius is needed...
Logged
eccentric millionaire financed by 'er indoors
Location:  Backworth Newcastle

Skype: chippiejnr

Offline PeterE

  • Sr. Member
  • ****
  • Posts: 458
  • Country: se
  • Gothenburg
Re: mini rotab
« Reply #7 on: November 19, 2011, 05:32:31 PM »
Quote from: John Rudd on November 19, 2011, 01:06:47 PM
Ummm. you got me.....

The base part is 1in sq EN1, then 1/2 in base plate about 3in sq, then the disc is about 3 in dia from 1/2 in plate from memory...

I'll try and take some measurements if you really want to know......
Ah, that is a handy size!  :thumbup:

The figures you gave gives the info necessary to get the proportions.

BR

/Peter
Logged
Always at the edge of my abilities, too often beyond ;-)

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: mini rotab
« Reply #8 on: November 19, 2011, 05:36:20 PM »
That looks to be a handy little weapon John!  :clap: :clap:

Nicely done....  :thumbup:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!
Pages: [1]   Go Up
« previous next »