The Craftmans Shop > Model Engineering

scott cam/crank

(1/2) > >>

swarf maker:
Hi everyone, newbie on madmodder.

I have made the Bruce Engineering Scott flame licker, but cant get it to run continuously, I cant make head nor tail of the timing instructions from the plans. 30 degs from what?, what is bottom dead centre? the open end of the cylinder or the flame end?
If somebody could do a piccy or drawing of the relationship between the cam and the crank disk I  could then work the rest out.

Cheers
Keith

Brass_Machine:
Hi Keith,

Welcome to the collective :borg:

I don't have an answer for you, but I am sure someone does here.

Eric

Jasonb:
Do a search, Bogstandard has done a very detailed build diary for this engine together with all the mods needed to get it to run.

Here you go funny enough it was called "Scott flame licker build"
http://madmodder.net/index.php?topic=4219.0

J

spuddevans:
Hi Keith :wave: I've nothing more constructive to add, but I just wanted to join in welcoming you to Madmodders.


Tim

saw:
Hi and welcome  :wave:

Navigation

[0] Message Index

[#] Next page