Gallery, Projects and General > Project Logs

jonesies popcorn designed by stew

(1/2) > >>

jonesie:
here is the start of my popcorn engine designed  by stew. also thanks to brian for mock up. the flywheel l i think  turned  out real good. took some time to bend spokes . need to  put radius on cylinder and crosshead. tough stuff done so now should go fast

sbwhart:
looking good  :thumbup:

Did you silver solder the fly wheel ?

I particularly like the look of it, spokes look to be more of a curve than mine.

 :clap: :clap: :clap: :clap: :clap:

Stew

saw:
jonesie, it's looking fantastic good, but I have to ask you please don't load up picture that size, it's very hard to have a good look.  :Doh:

doubleboost:
Looking very good
I like the shape of the flywheel :thumbup: :thumbup:
John

jonesie:
stew i silver soldered the spokes in the center hub, them turned the o.d. to a light  press and used 620 locktite into the bore.had to make the spokes twice as i had trouble getting them to solder, opened the holes up .003 and then pickled it all for a couple of days in vinegar . then used a larger tip to get the right heat, second time a charm. hope to get more done this week, need to cut the radius on the two parts.i also need to get some fire brick to help in silver soldering.jonesie

Navigation

[0] Message Index

[#] Next page