Gallery, Projects and General > Project Logs
jonesies popcorn designed by stew
(1/2) > >>
jonesie:
here is the start of my popcorn engine designed  by stew. also thanks to brian for mock up. the flywheel l i think  turned  out real good. took some time to bend spokes . need to  put radius on cylinder and crosshead. tough stuff done so now should go fast
sbwhart:
looking good  :thumbup:

Did you silver solder the fly wheel ?

I particularly like the look of it, spokes look to be more of a curve than mine.

 :clap: :clap: :clap: :clap: :clap:

Stew

saw:
jonesie, it's looking fantastic good, but I have to ask you please don't load up picture that size, it's very hard to have a good look.  :Doh:
doubleboost:
Looking very good
I like the shape of the flywheel :thumbup: :thumbup:
John
jonesie:
stew i silver soldered the spokes in the center hub, them turned the o.d. to a light  press and used 620 locktite into the bore.had to make the spokes twice as i had trouble getting them to solder, opened the holes up .003 and then pickled it all for a couple of days in vinegar . then used a larger tip to get the right heat, second time a charm. hope to get more done this week, need to cut the radius on the two parts.i also need to get some fire brick to help in silver soldering.jonesie
Navigation
Message Index
Next page

Go to full version