Author Topic: Fabricated hit and miss engine  (Read 3917 times)

Offline modelman1938

  • Jr. Member
  • **
  • Posts: 11
Fabricated hit and miss engine
« on: November 07, 2011, 05:08:36 PM »
Hi all at Madmodder
This is a video of a Hit and Miss engine that I finished working on earlier in the year, it is to my own design but I have tried to make it look like an Amanco which there was a picture of on the front of a ME mag. It has a dual type carburetor so runs equally well on petrol or gas, and apart from the flywheels is fabricated from plate,and bar stock.
Hugh


Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3529
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Fabricated hit and miss engine
« Reply #1 on: November 07, 2011, 05:17:16 PM »
Hi Hugh

Thats a very very nice looking engine and a real sweat runner, with some real neat and clean machining.

 :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap: :clap:

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: Fabricated hit and miss engine
« Reply #2 on: November 07, 2011, 05:31:25 PM »
Hi
Hugh
That is a very nice engine it makes nice noises as well  :thumbup: :thumbup: :thumbup:
Some construction pictures would be great  :beer: :beer:
John

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3529
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: Fabricated hit and miss engine
« Reply #3 on: November 08, 2011, 03:01:20 AM »
Hi
Hugh
That is a very nice engine it makes nice noises as well  :thumbup: :thumbup: :thumbup:
Some construction pictures would be great  :beer: :beer:
John

Yes please,  :thumbup:

Did you do any drawings ?.

Stew
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline jonesie

  • Jr. Member
  • **
  • Posts: 49
Re: Fabricated hit and miss engine
« Reply #4 on: November 08, 2011, 09:57:03 AM »
nice looking engine, and a real nice runner. hope my farmboy will run that good.i also would like to see plans if possible. jonesie