| Gallery, Projects and General > Gallery |
| A set of tool holders for my QCTP |
| (1/2) > >> |
| David Kirtley:
Well, a bit more practice. I have enough of the stock ones for my insert tooling but I have to swap them out when I want to use HSS tooling. Kind of defeats the purpose of a QCTP. I picked up a piece of scrap AL and cut the dovetail in one long strip. Then I cut them apart on the bandsaw and squared them up. I made them a little smaller than the stock ones from A2Z CNC. I sized them to use the smaller 1/4 and 3/16 tools that Harbor Freight has as opposed to the 3/8 bits that the A2Z holders take. The last one is not quite finished yet. I am going to drill it to fit the 1/4 round HSS bits to use for boring. For now, I have the 8-32 SHCS because I am waiting on my order of set screws. The adjuster is a 10-32 brass screw with a knurled knob and lock nut. Just picked these up from the big box store today. I have not tried my knurling tool yet. I just wanted to get these finished so I can use them. I really like the insert tooling on steel but the HSS leaves a better finish on AL. |
| ksor:
Nice work ! I still have mine to do ... http://kelds.weebly.com/vaeligrktoslashjsholdere-til-hurtigskifteren.html but my milll is down for updating http://kelds.weebly.com/udskifte-knaelig-paring-vpf-1.html Let Google do the translation for you - set it to ALWAYS translate my website. |
| David Kirtley:
That horizontal mill sure leaves a nice finish. I think my entire tool holder would fit inside of yours :) |
| kvom:
You can never have too many holders. Great job. |
| Xldevil:
Hello. Nice work,but don't you think that AL is too soft in the long term? Cheers,Ralph |
| Navigation |
| Message Index |
| Next page |