Gallery, Projects and General > Project Logs
Updating my old PEDERSEN VPF-1 with a "new" swingable knee
<< < (3/5) > >>
Henning:

--- Quote from: DMIOM on November 01, 2011, 06:14:19 PM ---
--- Quote from: Henning on November 01, 2011, 04:52:19 PM ---....... It's become a lot better, but expect some strange words and sentences which sometime look like it's been patch togheter by a band of drunk monkeys.....
--- End quote ---

Well, one thing I'm fairly sure of - the monkeys won't have Bokmål as their first language as I don't think the price of drink has come down enough there to allow the the monkeys to be paid in booze!   

MVH / Dave  :beer:

--- End quote ---

Price of drink is steadily increasing, so you're right. Probably not Bokmål monkeys. They wouldn't afford to be drunk  :beer:
Miner:
Ksor,
That's a really nice and fairly large, heavy duty mill you have. I'm not sure just what terminology is used in your country. Over here a mill that will allow the table to swing in a horizontal direction would be called a semi universal mill. That's a lot more work your doing than the average vertical mill would take. Well worth it I think for the extra capability you'll gain. Now you just need to find a universal dividing head to work with that new capability. I'd think your mill could easily turn my Atlas horizontal into chips.

Pete
ksor:
>>Minor
Oh, it's a very old one and I think that's why I have all this extra work ... right now I long for finishing the "update" and do some FUN stuff with it - I'm not sure I'm aware of all the new potential I got with the update - time will show it.
Miner:
Ksor,
If your not too familier with what your new capabilitys will add to your machine then try Googling "Universal Dividing Head".  I'd guess all that work is now done with CNC using a 4 axis machine. Long very low threads per inch for milling threads would be only one example, But it's a very handy addition that's quite rare for most manual mills built today. Machinery's Handbook has a large amount of pages devoted to the use of a universal dividing head used on a semi universal mill. Large drill bits were built on equipment like this too. Helical gears can be done also. In a simplified explanation, You install various gears on the end of the mills X axis leadscrew along with a banjo very much like a plain change gear lathe is set up for to do feeds and threading. This in turn drives the universal dividing head so you get both X axis travel and head rotation at the same time. Swinging the table horizontaly allows you to account for the helix angle.

I bought a universal dividing head even though my vertical mill isn't a semi universal as it's still useable, But not as much as if I did have a semi universal mill.

Your mill may be older, But I'd certainly love to have something like that.

Pete 
ksor:
A BIG step further !

http://kelds.weebly.com/udskifte-knaelig-paring-vpf-1.html

Scroll down on the site !
Navigation
Message Index
Next page
Previous page

Go to full version