| Gallery, Projects and General > How do I?? |
| Simple how do I? |
| (1/1) |
| -steves-:
Sure this one will be very straight forward, but what do I polish a casting with once I have machined it? I would like it all bright and shiney and have no idea where to start ... Thanks Steve |
| saw:
Hi. You have to begin with emery cloth. I use to begin with 600 then 800 and finish with 1000. After that polishing disc with good polish. I use to end with carpolish so the finsh will remain a longer time. :headbang: Good luck :D |
| -steves-:
--- Quote from: saw on October 25, 2011, 10:06:06 AM ---Hi. You have to begin with emery cloth. I use to begin with 600 then 800 and finish with 1000. After that polishing disc with good polish. I use to end with carpolish so the finsh will remain a longer time. :headbang: Good luck :D --- End quote --- Just knew it had to be fairly straight forward, but until you ask, you just don't know. Many thanks :) |
| saw:
Just ask, there is no such thing as a stupid question perhaps stupid answers :lol: :lol: Have a good day. :thumbup: |
| Navigation |
| Message Index |