« previous next »
Pages: [1] 2  All   Go Down

Author Topic: My Stuart D10  (Read 31261 times)

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
My Stuart D10
« on: October 21, 2011, 10:46:37 AM »
Hello gents. :wave:
I thought it was time for me to show you what I have been up to sense this spring. I brought a casting of Stuart D10 from EBay.  It was a casting from around 1975 so I have to take care of lot of rust. Besides that, I did a lot off fail but still manage to build up this engine and she is running quite well. Sorry to say, I have not yet have time to make a video, but it will come.

However here is some picture, I hope that you will like it.


Thanks for looking  :D
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline dsquire

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 2275
  • Country: ca
  • Kitchener, Ontario, Canada
Re: My Stuart D10
« Reply #1 on: October 21, 2011, 11:19:32 AM »
Berni

That is a great looking little engine. It certainly looks like you have applied lots of tender loving care. Thanks so much for sharing it with us and we look forward to a video when you are able.  :D :D

Cheers  :beer:

Don

Logged
Good, better, best.
Never let it rest,
'til your good is better,
and your better best

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: My Stuart D10
« Reply #2 on: October 21, 2011, 12:14:04 PM »
Benni.
That's beautiful!  :bugeye:

You've paid a lot of attention to all the fine details, and it shows!  :clap: :clap: :thumbup:

Looking forward to watching the video, soon.......  :D

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Offline PeterE

  • Sr. Member
  • ****
  • Posts: 458
  • Country: se
  • Gothenburg
Re: My Stuart D10
« Reply #3 on: October 21, 2011, 12:54:18 PM »
That is really good work Benni, well done all through together with very nice detailing  :clap: :clap: :clap: :clap: :clap:

I also like the blue colour you used, I have not seen that very often and this makes a very nice version, so to say.  :thumbup:

Waiting for the vid.  :drool:

BR

/Peter
Logged
Always at the edge of my abilities, too often beyond ;-)

Rob.Wilson

  • Guest
Re: My Stuart D10
« Reply #4 on: October 21, 2011, 01:06:15 PM »
So thats what you have been up to Benni   :jaw: ,,,,,  :clap: :clap: :clap: :clap: :clap:  very nice indeed  :thumbup:

As David D has said ,,, very nice detail work  :bow: :bow: :bow: :med:


I hope we get to see the video soon  :whip:


Nice one .Rob  :D
Logged

Offline sbwhart

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 3530
  • Country: gb
  • Smile, Be Happy, Have Fun and Rock Until you Drop
Re: My Stuart D10
« Reply #5 on: October 21, 2011, 01:16:51 PM »
Good one Benni  :thumbup: :thumbup: :thumbup: :thumbup: :thumbup:

Very well finished engine  :clap: :clap: :clap: :clap: :clap:


Look forward to the vid

Stew
Logged
A little bit of clearance never got in the road
 :wave:

Location:- Crewe Cheshire

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: My Stuart D10
« Reply #6 on: October 21, 2011, 05:28:29 PM »
Very nice
The detail and paint work are very good :clap: :clap: :clap:
Please post some video
Some machining pictures would be most welcome
John
Logged

Offline arnoldb

  • Hero Member
  • *****
  • Posts: 515
  • Country: na
  • Windhoek, Namibia
Re: My Stuart D10
« Reply #7 on: October 22, 2011, 03:46:12 AM »
Lovely job Benni; that engine looks great  :thumbup: :thumbup: :thumbup: :clap: :clap: :clap: :clap:

 :poke: So what's next?  :D

 :beer:, Arnold
Logged

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: My Stuart D10
« Reply #8 on: October 22, 2011, 10:37:37 AM »
Hi gents.  :wave:
Thanks for nice comments, it's nice to have good friends here.
Sorry to say, I don't have any photos how I build up this engine. I begun to take some but then I have a computer crach and the photos was gone...  :doh:

However here I have the vid I promes, I hope that you enjoy it.
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline Stilldrillin

  • Global Moderator
  • Hero Member
  • *****
  • Posts: 4972
  • Country: gb
  • Staveley, Derbyshire. England.
Re: My Stuart D10
« Reply #9 on: October 22, 2011, 10:44:31 AM »
Nice video Benni.  :thumbup:

Unfortunately, not able to watch all of it, due to P bucket's buffering........  :bang: :bang:

David D
Logged
David.

Still drilling holes... Sometimes, in the right place!

Still modifying bits of metal... Occasionally, making an improvement!

Rob.Wilson

  • Guest
Re: My Stuart D10
« Reply #10 on: October 22, 2011, 12:37:21 PM »
Runs GREAT  :headbang:,,  Benni  :ddb: :ddb: :ddb: :)

Well done that man  :clap: :clap: :clap:



Rob

Logged

Offline doubleboost

  • Madmodder Committee
  • Hero Member
  • *****
  • Posts: 1619
  • Country: gb
  • Newcastle Upon Tyne
Re: My Stuart D10
« Reply #11 on: October 30, 2011, 04:56:40 PM »
Well done :thumbup: :thumbup: :thumbup:
It is nice to see the engine running
John
Logged

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: My Stuart D10
« Reply #12 on: October 30, 2011, 05:10:48 PM »
Very very nice :thumbup: :thumbup: :thumbup: :clap: :clap: :clap:

 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline millwright

  • Sr. Member
  • ****
  • Posts: 273
  • Country: gb
  • Leeds West Yorshire
Re: My Stuart D10
« Reply #13 on: October 30, 2011, 06:12:13 PM »
Runs well and sounds well Benni, paint colour suits it.  :beer:
john
Logged

Offline lazylathe

  • Jr. Member
  • **
  • Posts: 54
  • Mastering the art of reducing metal into swarf!
Re: My Stuart D10
« Reply #14 on: October 30, 2011, 08:33:50 PM »
Excellent work Benni!!!! :clap:

Nice slow runner and a great paint job! :thumbup:

Andrew
Logged

Offline krv3000

  • Hero Member
  • *****
  • Posts: 2188
  • Country: gb
Re: My Stuart D10
« Reply #15 on: November 01, 2011, 07:37:52 PM »
well dun
Logged

Offline modeldozer

  • Sr. Member
  • ****
  • Posts: 299
  • Country: es
  • Valencia, Spain
    • AJ´s Truckmodeling
Re: My Stuart D10
« Reply #16 on: November 02, 2011, 01:53:45 PM »
Buetifull engine, well done. :bow:  :bow: :bow: :bow:

 :beer:

Abraham
Logged

Offline -steves-

  • Full Member
  • ***
  • Posts: 138
  • Country: gb
Re: My Stuart D10
« Reply #17 on: November 03, 2011, 03:28:08 AM »
Awesome engine, great work and a fantastic runner too  :)
Logged
very new to all this....

Offline ieezitin

  • Hero Member
  • *****
  • Posts: 662
Re: My Stuart D10
« Reply #18 on: November 03, 2011, 07:13:48 PM »
Beni.

Photobucket vids are so challenging to say the least its not your fault. wonderful machine you have created there looks beautiful and well crafted, excuse my ignorance is that a marine engine? if so and i have never made a model engine that's one i might try. great show and well done!.    Anthony 
Logged
If you cant fix it, get another hobby.

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: My Stuart D10
« Reply #19 on: November 03, 2011, 07:53:34 PM »
Thanks for the comments gentlemen, you have given me so fine words so I almost blush :zap:
ieezitin: yes it's a marin engine and I am still working on it. First I must make a new crankchaft then I will make a reverse gear.
I also thinking about feedwaterpump and a condensor and maybe some little more. I have alredy adjust the engine and it works much better now, so I am very please.  :D .
This project was so fun to do so I have hard time to let it go...but I take it easy. :coffee:
Ones again thank you my friends and have a good time with your'e project, I know I have.  :headbang:
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline saw

  • Hero Member
  • *****
  • Posts: 1003
  • Country: se
  • lucky amateur
    • Svenssons AckordsWerkstad
Re: My Stuart D10
« Reply #20 on: January 07, 2012, 06:23:30 PM »
Hello Gents.  :wave:

Well now I have my new lathe, and I have taking some time to finish of my Stuart D10, and I thought that I should show you. By the way, I have also done a new crankshaft, so this is not wobbling and as you can se, I have now a reversing gear. It was a little tricky to build the reversing geat, but after long days and late night here she is.


And some close up.





Sorry to the sharpness was not as good
Now I feel radar pleased so I will soon start a new project.  :)
 
 
Logged
_________________________
Greetings / Benni
http://myprojecty.wordpress.com/category/steam-engine/

Offline andyf

  • In Memoriam
  • Hero Member
  • *****
  • Posts: 1795
  • Country: gb
    • The Warco WM180 Lathe - Modifications
Re: My Stuart D10
« Reply #21 on: January 07, 2012, 07:50:52 PM »
That looks great, Benni! Only one picture slightly little out of focus, but still a better picture than most of mine.

How about another video showing it in motion?

Andy
Logged
Sale, Cheshire
I've cut the end off it twice, but it's still too short

Rob.Wilson

  • Guest
Re: My Stuart D10
« Reply #22 on: January 08, 2012, 06:12:09 AM »
 :bugeye:   Stunning Benni  :bow: :clap: :bow: :clap: :bow:


Rob  :thumbup:
Logged

Offline DaveH

  • Hero Member
  • *****
  • Posts: 1413
  • Country: za
  • Kempton Park, South Africa
Re: My Stuart D10
« Reply #23 on: January 08, 2012, 09:19:56 AM »
Really nice Benni  :thumbup: :thumbup: :thumbup: :clap: :clap: :clap:
 :beer:
DaveH
Logged
(Ex Leicester, Thurmaston, Ashby De La Zouch.)

Offline arnoldb

  • Hero Member
  • *****
  • Posts: 515
  • Country: na
  • Windhoek, Namibia
Re: My Stuart D10
« Reply #24 on: January 08, 2012, 10:18:51 AM »
 :clap: :clap: Very nice Benni - a real artwork  :thumbup:

 :beer:, Arnold
Logged
Pages: [1] 2  All   Go Up
« previous next »