| The Craftmans Shop > New from Old |
| First post |
| (1/3) > >> |
| Russell Nash:
Hi, this is my first post here. I thought I'd throw up a picture of the Dishing Hammer I just made. It started as a 50¢ sledge hammer from a flea market. Clicking through will get you to the set with a few more pictures from rusty sledge to finished dishing hammer. Dishing Hammer (finished) |
| Russell Nash:
This is what it looked like before I started. 1500g (3.3 lb) sledge 1 by bierlyeurope |
| spuddevans:
Hello Russell :wave: Welcome to madmodders. You've certainly cleaned up that old sledge :thumbup: It's good to see old tools being given a new lease of life. Tim |
| Russell Nash:
Thanks Tim, I had been looking for an old sledge, so I could try this. When the guy told me it was 50¢ I thought I heard him wrong. I made a show of finding the right change and then got moving. Less than two hours later it was hanging in my rust remover. |
| dickda1:
Hard to believe that beautiful hammer was hiding in that lump of rusted iron. Nice. -Dick |
| Navigation |
| Message Index |
| Next page |