The Shop > Our Shop
Building a shop
ddkhalaji:
Amazing work Chris! Thank you for sharing! :clap:
Brass_Machine:
That is looking nice!
Eric
mosey:
--- Quote from: ChriX on September 03, 2011, 09:50:45 AM ---Thanks for the replies! I sketched out the following (sorry for the poor quality, was not near a camera/scanner so used a webcam).
We may leave out the foam insulation under the floor. I am also unsure how many membranes/vapour barriers I need for the walls - does what I have make sense? I've got one between the outer cladding and insulation and then another between the insulation and inner cladding, which may not be necessary?
I am hoping to get away with minimal electric heating, just one of those oil filled radiators I expect, but we also have an old woodburner to go in to make things nice and cosy occasionally during the winter.
This makes things much easier... :headbang:
--- End quote ---
I can't read your sketch very well, but I suggest that you put anchor bolts poured into your footings every 4 feet or so to bolt the bottom of your framing members down. This will keep it from blowing away.
Mosey
andyf:
Bit too late for that now, Mosey!
But the whole thing seems to back on to, and be tied into, old stone walls along all of one wll and part of another, so I don't think it will be going anywhere in a hurry. Nor are the winds in ChriX's part of the UK particularly strong.
Andy
tumutbound:
Wow your shed is lined and has lights!
Luxury sheer luxury!
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version